GoTalk adds a speaker to the Geotab GPS tracking platform to give the driver more specific feedback. Customers create the message to be read to the driver using the Geotab web interface. Let’s just say you can be as creative and colorful as you like. Installing the GoTalk speaker is very similar to connecting any other IOX device to the GPS device. Click here to download the full GoTalk installation guide.

There are a few key things to remember.

1. Make connections in the sequence outlined in the installation guide.
2. Connection GoTalk to the IOX port first.
3. Connect the OBD harness to the Geotab GPS device.
4. Turn the vehicle on.
5. The unit will be in test mode. Cycle the ignition a few times to disable it.

Note: Each time the GPS device loses power it will be in test mode when reconnected. Cycle the ignition a few times to turn it off or it will beep while driving giving you feedback on everything it does. Test mode is used for troubleshooting and very helpful when something is not working correctly.

You may want to create a rule that is triggered upon powering the GPS device so you can confirm the installation is correct. After installation, you can remove the rule. Read more

	Installation Instructions GPS and GoTalk installation instructions
	GoTalk Install Guide Download guide with instructions by Fleetistics
	GoTalk Technical Specifications & Guide Download guide with tech specs and instructions by Geotab